1998-2002 LS1 F-Body Exhaust Accessories

DEI's Cool-Tape consists of a 1 mil aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape™ can reflect up to 1500 degrees of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market.

• Up to 1500 degree protection
• More flexible
• Strong adhesive
• Thin for a tight wrap

DEI's header and exhaust wrap is the first step in controlling underhood temperatures. This product is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers will reduce underhood temperatures by up to 50% while providing additional horsepower, engine protection and passenger comfort. All exhaust wraps are not alike! DEI starts with a hi-temp fiberglass composite material then adds a proprietary coating to enhance heat retention and expand durability. They are also the only manufacturer to add ¼” guidelines to ensure proper installation without the guess work.

   Titanium Exhaust Wrap
Constructed from pulverized lava rock, extruded into fibers and then woven into a tight weave gives this material titanium-like strength and toughness. This improvement in thermal protection helps reduce underhood temperatures resulting in cooler air intake for improved performance. And less heat in the engine bay means reducing the chances of “heat soak” conditions on vital underhood components.

Titanium Wrap is extremely durable and capable of handling more heat than any other wrap found in the market today. Typical glass fiber wrap is rated at handling 1200 degrees F of maximum direct heat, while Design Engineering’s new Titanium Wrap, using LR Technology, is capable of handling direct continuous heat up to 1800 degrees F and radiant heat up to 2800 degrees F. And because it’s pliable, there’s no need to wet the wrap when wrapping headers or pipes as many do in order to make the wrapping process easier to manage and to get a “tight” wrap.

Available in 1” and 2” widths and 15 and 50 foot lengths, Titanium Wrap will not shrink and because of it’s material structure, it is more resistant to temperature and vibration break-down, abrasions, chemical and hot oil spills vs. glass fiber wrap. Plus DEI’s Titanium Wrap offers an added feature - a very cool carbon fiber look!

Perfect for sealing exhaust wrap from the elements but you will find many other uses for this versatile product from grills to engine blocks.  Available in black and aluminum finish.

Whether you are building a new exhaust system from scratch, or just fixing a few leaks, we have all of the components that you should need.

Flowmaster's "Y" Collectors provide a smooth transition when fabricating a custom single exhaust requiring a Y connection.  Constructed from aluminized steel.

MagnaFlow's stamped Y-Pipe and Tru-X Pipe transitions are great for custom exhaust fabrication.  These work well for single to  dual exhaust, dual to dual exhaust, and balance tube applications.

It's a well known fact that all LS1 Camaros and Firebirds cars have a "banging" issue when a set of long tube headers are installed. This banging causes the knock sensor to activate, causing a timing retard, taking away much needed horsepower under hard acceleration (usually at a drag strip when traction is ideal). This Mufflex hanger uses a rubber bumpstop that will not allow the Y-pipe to hit the underbody of the car causing this situation.  The lower clamp and support rods are made out of stainless steel (tig welded for strength) and the upper rod is zinc coated steel.

Thunder Racing Oxygen Sensor Extensions are available in a variety of styles and lengths to ensure a perfect fit.

The elegant solution to exhaust clamps are these stainless steel band clamps.  The flat stainless steel band wraps around the joints in your exhaust system and cinch tight to provide a leak-proof seal and strong clamping action.

Hooker slip fit reducers allow you to adapt one size exhaust piping to a smaller size. Comes in a variety of sizes to suit your application.  Sold individually.

When working on your car or truck, nothing beats genuine GM quality.  These AC Delco ogygen sensors are a direct replacement for your original O2 sensor. 

Fel-Pro is Federal-Mogul’s premium sealing system and the industry’s leading brand of replacement sealing products for light vehicles, light trucks, medium-duty trucks and heavy-duty applications.