2004-2007 Cadillac CTS-V Clutches

Star Performance Clutches are available in 5 different stages.

Stage 1 - A Stage 1 clutch is a great upgrade from stock for street use. Stage 1 clutches include a metal backed / organic faced disk. 

Stage 2 - Stage 2 clutches are recommended for mildly upgraded vehicles with a power adder.  A segmented Kevlar disk is used on the Stage 2 clutch kits.

Stage 2+ - For all modified engines making more torque than the stage 2 can support. Maintains stage 2 feel for good daily drivability and offers very good wear characteristics, but provides a higher torque capacity. High clamp pressure plate, composite multi-friction carbon-kevlar material, high torque sprung hub and disc assembly, bearing and tool kit.

Stage 3 - Stage 3 clutches come with a sprung center disk with pads.  The disk pads are a carbon/ceramic combination. The ULTIMATE STREET/STRIP CLUTCH!  Sharp but smooth engagement with light pedal.

Stage 3+ - Features a streetable high clamp pressure plate and full face carbon semi-metallic disc. Listed as an upgrade to the stage 3, it offers torque capacities more comparable to the stage 5 but with drivability equal to, and in some cases better than, the stage 3. The high capacity and excellent drivability characteristics of this clutch is a result of years of research and development for this SPEC exclusive disc compound.

 Stage 4 - Stage 4 clutches are not recommended for street use due to their aggressive nature.  A rigid disk and carrier are used in combination with your choice of Kevlar, carbon or ceramic pads.

Stage 5 - Stage 5 clutch kits contain high-clamp load pressure plate, iron disc, bearings and a tool.  Extremely aggressive.

NOTE: C6 and CTS-V clutch kits are flywheel specific.  Be sure to check part number so it corresponds to the specific flywheel your using.  New flywheels can be purchased under the flywheel section.

Ram Clutches offer a variety of clutch options to suit every driveability and horsepower requirements.  Ram's Premium Replacement Clutch Sets are a basic OEM replacement unit that includes pressure plate, clutch disk and release bearing.  (LT1 unit features increased clamp load.)  These clutches are best suited for stock replacement driving with minimal performance additions and stock tires and gearing.

HDX Performance Sets include the release bearing and tool at no extra charge!  They offer increased clamp load pressure plates and premium organic disc facing for extremely smooth driveability and incresed holding power by 40% over stock.

Powergrip Sets include the release bearing and tool at no extra charge!  Powergrip sets feature increased clamp load pressures and a blend of 900 series sintered and 300 series organic friction materials for an excellent blend of driveability and increased holding power up to 80% over stock.

Powergrip HD Clutch Sets include the release bearing and tool at no extra charge!  Powergrip sets feature increased clamp load pressures and 900 series sintered frictionmaterials for an excellent blend of driveability and increased holding power up to 120% over stock.

Ram does not recommend using a stock flywheel for racing or high horsepower street applications.  Please use a billet steel or aluminum flywheel for your safety.  Ram clutch units are set up to work with factory hydraulics.  In some cases, such as LS1 vehicles in which flywheels have been resurfaced 2 or 3 times, an adjustable master cylinder may be required for proper release and adjustment.  Adjustable master cylinders are strongly recommended for racing, so minimum release can be set to avoid high RPM shifting problems. 

True Balance Billet Flywheels are ready to install right from the box!  Preceision ground and balanced to within 1/2 ounce/inch of factory spec's.  These SFI approved flywheels also feature multiple pressure plate bolt patterns and a quarter-inch-thick heat shield on alumninum models.RAM flywheels can be resurfaced instead of replacing the insert every time the clutch is freshened.

Street Dual Disk Clutch assembly consists of an aluminum flywheel, easy pedal effort diaphragm pressure plate, 300 series friction material, and a special floater plate retainer system that virtually eliminates floater plate rattle.  The holding capacity for this clutch is in excess of  900 ft/lbs, yet  the engagement is silky smooth thanks to the 300 series friction.