2005-2010 Corvette Exhaust Accessories

DEI's Cool-Tape consists of a 1 mil aluminized material bonded to a light weight, woven fiberglass with super strong adhesive backing and release liner. Cool-Tape™ can reflect up to 1500 degrees of radiant heat. The uses are limited only by your imagination but common uses include wrapping wires or fuel lines and sealing openings in floor boards or firewalls. This is the finest heat shielding tape on the market.

• Up to 1500 degree protection
• More flexible
• Strong adhesive
• Thin for a tight wrap

DEI's header and exhaust wrap is the first step in controlling underhood temperatures. This product is designed to keep heat in the exhaust and evacuate it out of the engine compartment. Wrapping your headers will reduce underhood temperatures by up to 50% while providing additional horsepower, engine protection and passenger comfort. All exhaust wraps are not alike! DEI starts with a hi-temp fiberglass composite material then adds a proprietary coating to enhance heat retention and expand durability. They are also the only manufacturer to add ¼” guidelines to ensure proper installation without the guess work.

   Titanium Exhaust Wrap
Constructed from pulverized lava rock, extruded into fibers and then woven into a tight weave gives this material titanium-like strength and toughness. This improvement in thermal protection helps reduce underhood temperatures resulting in cooler air intake for improved performance. And less heat in the engine bay means reducing the chances of “heat soak” conditions on vital underhood components.

Titanium Wrap is extremely durable and capable of handling more heat than any other wrap found in the market today. Typical glass fiber wrap is rated at handling 1200 degrees F of maximum direct heat, while Design Engineering’s new Titanium Wrap, using LR Technology, is capable of handling direct continuous heat up to 1800 degrees F and radiant heat up to 2800 degrees F. And because it’s pliable, there’s no need to wet the wrap when wrapping headers or pipes as many do in order to make the wrapping process easier to manage and to get a “tight” wrap.

Available in 1” and 2” widths and 15 and 50 foot lengths, Titanium Wrap will not shrink and because of it’s material structure, it is more resistant to temperature and vibration break-down, abrasions, chemical and hot oil spills vs. glass fiber wrap. Plus DEI’s Titanium Wrap offers an added feature - a very cool carbon fiber look!

Perfect for sealing exhaust wrap from the elements but you will find many other uses for this versatile product from grills to engine blocks.  Available in black and aluminum finish.

Whether you are building a new exhaust system from scratch, or just fixing a few leaks, we have all of the components that you should need.

MagnaFlow's stamped Y-Pipe and Tru-X Pipe transitions are great for custom exhaust fabrication.  These work well for single to  dual exhaust, dual to dual exhaust, and balance tube applications.

These harnesses allows the oxygen sensors to be relocated up to 24 inches from their factory locations. This harness is perfect for the installation of headers which require the sensor be moved further downstream. The high-temperature rated Teflon wire and fiberglass loom allow the harness to be placed close to the exhaust manifolds without worry of being damaged. The harness' small 1/4" outer diameter allows it to be routed in tight areas while providing increased clearance from hot or moving components (i.e. turbo systems). The loom's black outer jacket provides for a low-key appearance in your engine compartment.

KEY FEATURES:

- Fully Plug and Play with the factory harness & sensors
- Avaiable with Military spec. high-temperature Teflon wire (same type used on oxygen sensors)
- Optional High-temperature (1200F) heat-treated black fiberglass 1/4" protective loom (less bulk and superior to plastic loom)
- All connections crimped and soldered

The elegant solution to exhaust clamps are these stainless steel band clamps.  The flat stainless steel band wraps around the joints in your exhaust system and cinch tight to provide a leak-proof seal and strong clamping action.

Hooker slip fit reducers allow you to adapt one size exhaust piping to a smaller size. Comes in a variety of sizes to suit your application.  Sold individually.

Fel-Pro is Federal-Mogul’s premium sealing system and the industry’s leading brand of replacement sealing products for light vehicles, light trucks, medium-duty trucks and heavy-duty applications.