2010-2012 Camaro Sway Bars

Reduce torque steer and improve launch traction in your 2010-2012 Camaro with an Xtreme Anti-roll Bar from BMR Suspension. This large diameter tubular sway bar features 3 adjustment locations that range from 432% to 780% stiffer than the OE bar. Included are BMR’s billet aluminum bushing saddles, high durometer polyurethane mounting bushings and adjustable spherical bearing end links. A BMR Xtreme Anti-roll bar (XSB004) will decrease body roll and dramatically increase the launch stability of your new Camaro. Available in red and black hammertone powdercoat finishes. Simple bolt-on installation time of 1 hour.

The sway bar tabs on the OE control arm have proven to be failure-prone when stiffer aftermarket sway bars are installed. The nature of the design itself along with the thin OE material just cannot withstand the additional loading created from higher rate sway bars. BMR has a simple bolt-in solution that not only resolves this issue but can be installed in 45 minutes or less!

Made from 3/16" laser-cut plate, the design bolts to existing mounting holes in the control arms upper bracing. The BMR End Link Mounting Brace simply slips under the OE mount and mimics the OE shape. This not only spreads the load out over a greater area but also reinforces the mounting hole with an additional 3/16" of plate thickness.

NOTE: On 2012 models, these braces are only necessary if you are using a pre-2012 style sway bar.

• Simple bolt-on solution
• No drilling
• No welding
• Control arm removal not necessary

Improve cornering by reducing body roll with a set of Hotchkis Performance Sway Bars. Hotchkis bars feature lightweight hollow construction and include greasable polyurethane bushings,and are powder coated for durability. Each bar set has been tested and tuned to ensure the best performance possible.

Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your car’s handling characteristics.

Our Anti-Roll-Kits reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.

Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation.

Leaving the line sideways? Car looks like the Leaning Tower of Pisa when you launch? Bone jarring wheel hop?

Spohn Performance's Pro-Series rear anti-roll sway bar eliminates torque steer and body roll during hard launches and will drastically improve consistency and stability going down the track. Spohn Performance's Pro-Series rear anti-roll sway bar is the single biggest traction improvement you can make to your Camaro. Our Pro-Series rear sway bar dramatically reduces body roll and wheel hop. Don't skimp on the foundation of your rear suspension!

The Spohn Pro-Series rear anti-roll sway bar is a larger & stronger 32mm (1.25") diameter solid 4140 chrome moly rear sway bar to reduce body roll on launch and dramatically reduce wheel hop. Compared to the factory's (SS) .865" diameter rear sway bar, the Pro-Drag rear anti-roll sway bar really provides the Camaro with pavement digging wheel hop free traction and provides for even 50/50 distribution of weight transfer at launch. The three end link attachment points allow you to dial in the stiffness your car best responds to. The provided Extreme Duty spherical rod ended adjustable end links allow you to pre-load your rear suspension for straight launches.

The Pro-Series rear anti-roll sway bar is made from solid 4140 heat treated spring grade chrome moly steel. The bar is entirely heat formed and coined as one piece. Spohn Performance puts the bar through this extensive process to insure that the final product will be the strongest, most durable bar on the market, and that it will be the most resistant to form alteration.

Spohn Performance's Pro-Series rear anti-roll sway bar includes fluted polyurethane bushings with zinc plated bushing shells. The sway bar also includes two chrome plated shaft collars that lock in the bar's lateral position to prevent any side to side movement. The entire assembly is a 100% bolt-in installation with no drilling or modifications required! The sway bar is available powder coated in your choice of the above colors for a brilliant and durable finish.

End Links: The Pro-Series rear anti-roll sway bar includes Spohn's Extreme Duty rear end links for the ultimate in adjustability, strength and performance.